Mustek PP3000 Especificaciones descargar pdf (Pagina 31)

PST-1000 series Technical Manual 5 - 3

PST command mode

HEX CODE FUNCTION

<01> Set Pass Through Flag (should not be used)

<06> <N

> <N

> Change Leading Code

<14> <01> Wraparound Mode (Default)

<14> <02> Vertical Scroll Mode

<14> <03> Insert Mode

<14> <04> Overwrite Mode (Default)

<14> <08> Back Space

<14> <09> Move Cursor Right

<14> <0A> Move Cursor Down

<14> <0B> Move Cursor Left

<14> <0C> Delete Character

<14> <0D> Move Cursor To Left Most Position

<14> <0E> Clear Display

<14> <10> Clear Line 1

<14> <11> Clear Line 2

<14> <12> Cursor Block Mode

<14> <13> Cursor Under Line Mode

<14> <15> <02> Clear Pass Through Flag

<14> <16> Switch To Epson Mode

<14> <17> Cursor On

<14> <18> Cursor Off

<14> <19> Reset

<14> <1A> <P> Move Cursor To Position P (P=0~13,14~27h)

<14> <1B> Move Cursor To Rightmost Position Of Line 1

<14> <1C> Move Cursor To Rightmost Position Of Line 2

Though the power on default of the OD-300 itself is the Epson command

mode, the PST system may have changed the mode to this PST command mode after

the whole power-on-self-test depending on the software system installed. It would be

advisable for the programmer to check ahead.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 78 79

Sin comentarios

Mustek PP3000 Especificaciones Pagina 31