Mustek PP3000 Manual de usuario descargar pdf (Pagina 10)

1 - 4

PST-7000 series user’s manual – BRIEF INTRODUCTION

Direct Controlled Cash Drawer Port

There is one direct controlled cash drawer port in the rear room of each

PST7000 system. This port controls one cash drawer (mostly recommended with the

CR3X00/CR4X00) with the standard accessory cable CCBLA-180. This port can

control two cash drawers independently using the optional cable CCBLA-238.

Customer Display Port

Every PST system provides a customer display port to drive any Posiflex

customer display. However, the system case with a base tube of a customer display is

different from that without a customer display.

Cashier Display Port

The cashier display ports utilized in PST7000/7300 and PST7050/7350 are

different to each other. The monitor used in PST7000 and PST7300 is connected to a

3 x 5 D VGA connector while the TFT LCD used in PST7030 and PST7350 is

connected to a 26 pin SCSI type specialized connector. Both connectors exist and

function on any of the models.

Serial Ports

There are 4 serial ports in a PST7000 system. COM1 is shared by the customer

display port and the direct driven cash drawer port. COM1 is capable of providing a

+5 V DC supply. COM2, COM3 and COM4 each are capable of providing

independently a +5 V DC or a +12 V DC supply. All these DC supplies are achieved

through internal jumper setting and they are all defaulted to give no DC supply at

delivery. The COM3 and COM4 ports can be disabled by internal jumper setting if

any resource conflict occurs between any added adapter card and these 2 ports.

Parallel Port

Each PST system is equipped with a parallel port that supports SPP/EPP/ECP.

USB Device Connection

The PST7000 series is equipped with two connectors for connection of USB

(Universal Serial Bus) devices.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 66 67

Sin comentarios

Mustek PP3000 Manual de usuario Pagina 10